The Impact of Citric Acid Solution on Hydraulic Calcium Silicate-Based Sealers and Root Dentin: A Preliminary Assessment.

Hydraulic calcium silicate-based (HCS) sealers have recently gained tremendous popularity due to their unique properties. However, their removal during endodontic retreatment is challenging. The solvent, which could chemically deteriorate the material, would be highly desirable for endodontic retreatment procedures. This preliminary study assessed the interplay and dissolving capability of 10% and 20% citric acid, compared to 17% EDTA, on commonly used HCS sealers (AH Plus Bioceramic Sealer, Bio-C Sealer, BioRoot RCS, TotalFill BC Sealer), and evaluated the potential impact of these solutions on root dentin structure. The interaction between tested sealers and irrigating solutions was photographed, and solubility-related mass changes were determined. The surface morphology of treated filling materials and dentin was evaluated using a scanning electron microscope (SEM). One-way analysis of variance (ANOVA) along with Tukey's test were used to detect the statistically significant differences among groups at the confidence level of 0.95. Intense gas release was observed during the interaction of HCS materials and citric acid, with no evidently visible "bubbling" after the immersion in EDTA. The mass loss of HCS sealers equally confirmed the significantly higher dissolving characteristics of 10% and 20% citric acid solutions compared to EDTA. The surface structural changes, associated with pore and crack formation, were mainly seen for HCS sealers exposed to citric acid. Meanwhile, no severe erosion was detected for dentin after root canal preparation with 10% and 20% citric acid solutions. These findings demonstrate that citric acid has the potential to dissolve HCS sealers with minimal or no negative impact on root dentin, suggesting citric acid as a solvent for HCS sealers in endodontic retreatment procedures.

Advanced Materials for Clinical Endodontic Applications: Current Status and Future Directions.

Endodontics has significantly evolved in recent years, with advancements in instruments, biomaterials and nanomaterials science playing a pivotal role [...].

Immediate and Long-Term Radiopacity and Surface Morphology of Hydraulic Calcium Silicate-Based Materials.

The present study aimed to evaluate and compare the radiopacity and surface morphology of AH Plus Bioceramic Sealer (AHPB), Bio-C Sealer (BIOC), Biodentine (BD), BioRoot RCS (BR), Grey-MTAFlow (GMF), White-MTAFlow (WMF), TotalFill BC Sealer (TF), and TotalFill BC Sealer HiFlow (TFHF) at different time moments­30 min, 24 h, and 28 days. Ten specimens of each material were prepared according to the ISO-6876:2012 standard and radiographed next to an aluminum step wedge using a digital sensor. The specimens were stored in a gelatinized Hank's balanced salt solution at 37 °C between assessments. The mean grayscale values of each specimen were converted into equivalent aluminum thickness by a linear regression model. Characterization of the surface morphology was performed by using a scanning electron microscope at ×4.0k and ×10.0k magnifications. The radiographic analysis revealed that all the tested materials exceeded the ISO-specified limit of 3 mm Al, with the highest radiopacity presented by AHPB and the lowest by BD. None of the tested materials demonstrated considerable variances between the 30 min and the 24 h radiopacity level (p < 0.05), and statistically significant long-term radiopacity changes were exhibited by BR, TFHF, and TF (p > 0.05). All the specimens demonstrated a common feature of limited precipitate formation, with numerous unreacted particles still presented on the surface after 24 h, whereas the particle rearrangement and the deposition of precipitates were clearly observed after 28 days.

Cytotoxicity and Efficacy in Debris and Smear Layer Removal of HOCl-Based Irrigating Solution: An In Vitro Study.

In the present study we evaluated the cytotoxicity of super-oxidized water on human gingival fibroblasts and its efficacy in debris and smear layer removal from root canal walls. Cultured gingival fibroblasts were exposed to super-oxidized water (Sterilox), which was diluted in Iscove's modified Dulbecco's medium (IMDM) at 30%, 40%, 50%, 60% and 70% concentrations. The control group was maintained in IMDM. The cell viability was evaluated by means of an MTT assay after incubation periods of 1 h, 2 h, 24 h and 48 h. Pathological cellular changes were also observed under fluorescence and phase contrast microscopes. The efficacy in debris and smear layer removal was evaluated in comparison to the conventional application of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA). Forty maxillary premolars were randomly divided into two equal groups (n = 20) and shaped with ProTaper NEXT rotary instruments using Sterilox or NaOCl/EDTA for irrigation. Afterwards, roots were split longitudinally and examined under a scanning electron microscope. The results revealed that super-oxidized water and sterile distilled water have acceptable biological properties for endodontic applications at concentrations up to 50% (p > 0.05). Moreover, super-oxidized water is equally effective in debris and smear layer removal as compared to NaOCl/EDTA (p > 0.05).

Accuracy of Dynamic Navigation for Non-Surgical Endodontic Treatment: A Systematic Review.

In recent years, the application of Guided Endodontics has gained interest for non-surgical endodontic treatment and retreatment. The newest research focuses on the accuracy of Dynamic Navigation (DN). This article systematically reviewed existing data on the accuracy of non-surgical endodontic treatment procedures that were completed using DN. Following the PRISMA criteria, an electronic database search was conducted in PubMed, Web of Science, Scopus, and Cochrane Library. Studies comparing the accuracy of non-surgical endodontic treatment using DN and the conventional freehand technique were eligible. The literature search resulted in 176 preliminary records. After the selection process six studies were included. The risk of bias was evaluated using the modified Cochrane Collaboration Risk of Bias 2.0 tool. Five studies examined the aid of DN for planning and executing endodontic access cavities, and one for fiber post removal. In two studies, endodontic access cavities were performed in teeth with pulp canal obliteration. The main outcomes that were measured in the included studies were preparation time, global coronal entry point and apical endpoint deviations, angular deviation, tooth substance loss, qualitative precision, number of unsuccessful attempts or procedural mishaps. The risk of bias was rated from low to raising some concerns. Overall, DN showed increased accuracy compared to the freehanded technique and could be especially helpful in treating highly difficult endodontic cases. Clinical studies are needed to confirm the published in vitro data.

Discoloration Potential of Biodentine: A Systematic Review.

The aim of this systematic review is to investigate the teeth discoloration potential of Biodentine. An electronic search in six databases (PubMed, Cochrane Library, LILACS, SCIELO, Web of Science, and Scopus) was conducted by three independent reviewers to identify eligible articles. The following search terms were used: ((discolo*, staining potential, color, colour, or spectrophotomet*), (teeth or tooth), and (Biodentine)). Methodology following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines was adopted for this investigation. At the end of the selection process, 30 articles were identified as eligible, of which 14 in vitro studies were included in this systematic review. Nine of the included studies evaluated the discoloration potential of Biodentine in the presence of blood. Within the limitations of this review, teeth discoloration using Biodentine is highly expected when material is placed in direct contact with blood during dental procedures. In the absence of blood, Biodentine causes less teeth color changes than MTA-based materials, but it is still unclear what clinically relevant results could be expected regarding the discoloration frequency and intensity induced by Biodentine.

The Effect of Ultrasonic Agitation on the Porosity Distribution in Apically Perforated Root Canals Filled with Different Bioceramic Materials and Techniques: A Micro-CT Assessment.

The present study evaluated the effect of ultrasonic agitation on the porosity distribution of BioRoot RCS/single gutta-percha cone (BR/SC) and MTA Flow (MF) root canals fillings used as apical plugs in moderately curved and apically perforated roots. Eighty mesial root canals of mandibular first molars were enlarged up to ProTaper NEXT X5 rotary instrument 2 mm beyond the apical foramen, simulating apical perforations. Specimens were randomly divided into four experimental groups (20 canals per group) according to the material and technique used for root canal obturation: BR/SC, BR/SC with ultrasonic agitation (BR/SC-UA), MF and MF with ultrasonic agitation (MF-UA). The ultrasonic tip was passively inserted into the root canal after the injection of flowable cement and activated for 10 s. The specimens were scanned before and after obturation with a high-resolution micro-computed tomography scanner, and the porosity of the apical plugs was assessed. The differences between groups were analyzed using the Kruskal-Wallis and Mann-Whitney tests, with the significance level set at 5%. None of the obturation materials and techniques used in this study was able to provide a pore-free root canal filling in the apical 5 mm. Considerably higher percentages of open and closed pores were observed in the MF and MF-UA groups, with the highest porosity being in the MF-UA group (p < 0.05). No significant differences were observed between the BR/SC and BR/SC-UA groups, where the quantity of open and closed pores remained similar (p > 0.05).

Porosity Distribution in Single Cone Root Canal Fillings Performed by Operators with Different Clinical Experience: A microCT Assessment.

The objective of this study was to assess the porosity distribution of BioRoot RCS/single gutta-percha point root-canal fillings performed by a general dental practitioner and endodontist. Fourteen plastic models of maxillary premolars with two roots were selected and shaped with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into two experimental groups. A total of 14 canals in each group were obturated by two different operators with one HyFlex EDM size 40 gutta-percha point and BioRoot RCS sealer. The specimens were scanned with a high-resolution micro-computed tomography scanner, and the porosity of the fillings at the coronal, middle, and apical thirds of the root canals was qualified and quantified. The differences between groups and root-canal thirds were compared using Mann-Whitney, Friedman, and Wilcoxon tests with the significance level set at p < 0.05. The highest number of pores was observed in the apical third of root-canal fillings in both groups; however, the porosity distribution between the two groups was not significantly different in the apical and middle thirds (p > 0.05). Statistically significant differences were determined only in the coronal third (p < 0.05). The predominance of open pores was detected in all root-canal thirds and groups, with no significant differences in the number of open pores between the coronal and middle thirds (p > 0.05).

Microcomputed Tomographic Assessment of the Single Cone Root Canal Fillings Performed by Undergraduate Student, Postgraduate Student and Specialist Endodontist.

The present study evaluated the obturation quality of root canals filled with BioRoot RCS sealer and single gutta-percha point by undergraduate student (US), postgraduate student (PS) and endodontist (ED). Twenty-one plastic models of upper premolars were enlarged with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into three groups (7 teeth/14 canals per group): US, PS and ED. After the obturation of root canals with BioRoot RCS and one HyFlex EDM size 40 gutta-percha point, plastic models were scanned using micro-computed tomography scanner (µCT) SkyScan 1272 at isotropic resolution of 10 µm. The porosity distribution was evaluated separately for the apical, middle and coronal thirds. The Kruskal-Wallis, Mann-Whitney, Friedman and Wilcoxon tests with the significance level set at 5% were used for data analysis. The µCT evaluation revealed open pores being the dominant type of porosity in all experimental groups and root canal thirds, with the highest percentage of pores in the apical third of root canal fillings. The quality and homogeneity of single cone root canals fillings remained similar between the groups in the apical and middle thirds (p > 0.05). Significant differences were observed only in the coronal third (p < 0.05).

The periodontal senior case clinical challenge: Students' opinions of a formative virtual assessment during the COVID-19 emergency.

INTRODUCTION: Due to COVID-19, innovative, virtual educational methods are being developed to provide students with learning experiences comparable to established clinical practices. Our objective was to produce the Periodontal Senior Case Clinical Challenge (PSCCC) that would provide fourth-year students an alternative for senior case presentations and would be a formative assessment for which student opinions would be provided and analysed. The PSCCC would utilise an online, case-based, written, clinical assessment and follow-up, structured discussion to challenge students to demonstrate ability to apply didactic periodontal knowledge to patient-based experiences. We hypothesised the PSCCC would provide effective learning and a formative assessment. MATERIAL AND METHODS: Relevant didactic resources were distributed to 48 students for independent review. The PSCCC was delivered in two sections, (1) a case-based assessment via a virtual classroom with written student responses, and (2) oral discussions conducted via virtual meetings that were moderated and assessed by ten periodontists, with the collaboration of nine residents. A voluntary six-statement survey was used to evaluate the students' opinions of the PSCCC. The scores for 75% (36/48) of students who participated were evaluated for statistical and clinical importance. RESULTS: The value of our PSCCC was supported by 91.7% (33/36) of the analyses (p < .0008). DISCUSSION: The PSCCC was a successful alternative pathway to assess students' clinical and didactic integrated knowledge in periodontics. It provided a unified vision of treatment of the selected case, building on all aspects of the students' periodontal education whilst allowing interaction in a simultaneous, three-tiered educational approach, involving dental students, periodontal residents and faculty. CONCLUSION: In support of our hypothesis, for each of the 6 statements, ≥94.44% (34/36) of the scores given by the students were considered exceptionally strong clinical support for our pedagogical strategy that combines educational resources and can be successfully implemented in other programmes.

Flowable Urethane Dimethacrylate-Based Filler for Root Canal Obturation in Primary Molars: A Pilot SEM and microCT Assessment.

Pulpectomy in deciduous teeth involves endodontic access opening, root canal debridement and obturation with an appropriate filling material. EndoREZ (ER) is the urethane dimethacrylate-based filler, which can be used for root canal obturation in permanent and primary teeth. This observation aimed to evaluate the behavior of the ER as a filler in root canals of two primary molars after the physiological resorption process using the scanning electron microscopy (SEM) and micro-computed tomography (µCT) in second lower molars after their natural exfoliation. The SEM analysis revealed a non-uniform, porous and lacunary structure of ER, visually similar to the resorbed surface of the dentine. The µCT observations demonstrated the differences in the resorption level of the root and material surfaces. The preliminary observations suggest that ER is resorbed faster than root tissues and can therefore be a suitable material for the root canal filling in primary teeth. However, more investigations are needed to support these preliminary findings.

Shaping and Centering Ability, Cyclic Fatigue Resistance and Fractographic Analysis of Three Thermally Treated NiTi Endodontic Instrument Systems.

The better understanding of the clinically important behavioral features of new instrument systems has an important significance for the clinical endodontics. This study aimed to investigate the shaping and centering ability as well as cyclic fatigue resistance of HyFlex CM (CM), HyFlex EDM (EDM) and EdgeFile (EF) thermally treated nickel-titanium (NiTi) endodontic instrument systems. Sixty curved root canals of the mesial roots of mandibular molars were randomly assigned into three groups (n = 20) and shaped using CM, EDM and EF files up to the size 40 and taper 04 of the instruments. µCT scanning of the specimens before and after preparation was performed and the morphometric 2D and 3D parameters were evaluated in the apical, middle and coronal thirds of root canals. In each group, 40.04 instruments (n = 20) were subjected to the cyclic fatigue resistance test in artificial root canals at 37 °C temperature until fractures occurred, and the number of cycles to failure (NCF) was calculated. The fractographic analysis was performed using a scanning electron microscope, evaluating topographic features and surface profiles of the separated instruments. The one-way analysis of variance with post hoc Tuckey's test was used for statistical analysis of the data; the significance level was set at 5%. All systems prepared the comparable percentage of root canal surface with the similar magnitude of canal transportation in all root thirds (p > 0.05), but demonstrated significantly different resistance to cyclic fatigue (p < 0.05). The most resistant to fracture was EF, followed by EDM and CM. The length of the fractured fragments was not significantly different between the groups, and fractographic analysis by SEM detected the typical topographic features of separated thermally treated NiTi instrument surfaces.

The Effect of Different Cleaning Protocols of Polymer-Based Prosthetic Materials on the Behavior of Human Gingival Fibroblasts.

Dental implant abutment and prosthetic materials, their surface treatment, and cleaning modalities are important factors for the formation of a peri-implant soft tissue seal and long-term stability of bone around the implant. This study aimed to investigate the influence of a polymeric material surface cleaning method on the surface roughness, water contact angle, and human gingival fibroblasts (HGF) proliferation. Polymeric materials tested: two types of milled polymethylmethacrylate (PMMA-Ker and PMMA-Bre), three-dimensionally (3D) printed polymethylmethacrylate (PMMA-3D), polyetheretherketone (PEEK), and polyetherketoneketone (PEKK). Titanium (Ti) and zirconia oxide ceramics (ZrO-HT) were used as positive controls. A conventional surface cleaning protocol (CCP) was compared to a multi-step research cleaning method (RCP). Application of the RCP method allowed to reduce Sa values in all groups from 0.14-0.28 µm to 0.08-0.17 µm (p < 0.05 in PMMA-Ker and PEEK groups). Moreover, the water contact angle increased in all groups from 74-91° to 83-101° (p < 0.05 in the PEKK group), except ZrO-HT-it was reduced from 98.7 ± 4.5° to 69.9 ± 6.4° (p < 0.05). CCP resulted in higher variability of HGF viability after 48 and 72 h. RCP application led to higher HGF viability in PMMA-3D and PEKK groups after 48 h, but lower for the PMMA-Ker group (p < 0.05). After 72 h, no significant differences in HGF viability between both cleaning methods were observed. It can be concluded that the cleaning method of the polymeric materials affected surface roughness, contact angle, and HGF viability at 48 h.

Microcomputed tomography evaluation of the root canals morphology of the mandibular first molars.

OBJECTIVE: The knowledge of the internal anatomy of the root canal system and its variations has a significant impact on the quality and outcome of endodontic treatment. The aim of this study was to evaluate the three-dimensional anatomical features of the root canals of mandibular first molars by using micro-computed tomography. MATERIAL AND METHODS: Sixty mandibular first molars were scanned using a high-resolution micro-computed tomography device. The 2- and 3-3-dimensional anatomical features of each root such as distance between anatomical apex and apical foramen, the number of the lateral canals and configuration of the isthmuses, were evaluated. RESULTS: The average distance between the anatomical apex and the apical foramen was 1.047 mm. Lateral canals were present in 85% of the cases, while 76% of them were localized in the apical third of the root. 80% of the mesial roots had isthmuses and the configuration of Type I, according to the Fan classification, was the most prevalent (35%). CONCLUSION: The results of this study revealed the wide variations of internal root canal anatomy in mandibular first molars, including lateral canals and isthmuses. A clinician should always consider the possible difficulties of anatomical variations before starting root canal treatment, to select the best and optimal treatment strategies.

Dental Trauma Experience, Attitudes and Trauma Prevention in 11- to 13-Year-Old Lithuanian Schoolchildren.

PURPOSE: To identify the prevalence and determinants of dental trauma in permanent anterior teeth among 11- to 13-year-old schoolchildren, to compare self-reported dental trauma rates with clinical examination trauma rates, and to examine mouthguard use among children engaged in contact sports. MATERIALS AND METHODS: A probability sampling scheme was used to recruit schools, with all 6th grade children in the selected schools invited to participate. A total of 2621 caregiver consent forms were sent, of which 807 were returned (31%). Caregivers were asked four trauma-related questions. Clinical examinations included assessment of dental trauma experience (trauma index with five severity codes), lip competence and incisal overjet. Child- and tooth-level analyses were performed. RESULTS: Clinical evidence of dental trauma was found in 52% of participants, 13% self-reported dental trauma, and 7% of children did not remember the occurrence of any trauma. The two most frequently self-reported reasons of dental injury were falls or collisions with objects (63%) and sport/leisure activities (32%). Nearly half of the more severe dental injuries did not receive the necessary treatments. One-third of schoolchildren participated in contact sport activities, but only 3% always used mouthguards. There was a substantial difference between the clinical and self-reported findings. Logistic regression analyses revealed no statistically significant associations between dental trauma experience and the potential determinants studied: gender, lip coverage and overjet. CONCLUSION: In this study, traumatic dental injuries were observed with 52% prevalence. A substantial discrepancy between self-reported and clinical findings was observed.

Porosity Distribution in Apically Perforated Curved Root Canals Filled with Two Different Calcium Silicate Based Materials and Techniques: A Micro-Computed Tomography Study.

The present study evaluated the porosity distribution of BioRoot RCS/single gutta-percha point (BR/SC) and MTA flow (MF) fillings, which were used as plugs for the apical perforation repair in curved canals of extracted mandibular molars using micro-computed tomography (µCT). Forty mesial root canals of mandibular first molars were shaped with ProTaper NEXT X1-X5 files 2 mm beyond the apex to simulate apical perforations that were randomly divided into two groups (n = 20) according to the material and technique used for the apical plug: BR/SC or MF. The specimens were scanned before and after canal filling at an isotropic resolution of 9.9 µm. The volumetric analysis of voids in the apical 5 mm of the fillings was performed. Data were analyzed using one-way ANOVA with Bonferroni correction (p < 0.05). Micro-computed tomography (µCT) evaluation revealed significant differences between the groups in terms of porosity: the total volume and percentage volume of voids was lower in the BR/SC group in comparison with the MF group (p < 0.05), with the predominance of open pores in both groups. Neither of the materials and/or application techniques were able to produce void-free root fillings in the apical region of artificially perforated curved roots of mandibular molars.

Potential to induce dentinal cracks during retreatment procedures of teeth treated with "Russian red": An ex vivo study.

OBJECTIVE: The aim of this study was to compare the impact of treatment procedures on roots previously treated with resorcinol-formaldehyde resin and analyze the effectiveness of dye and magnification for the detection of dentin cracks. MATERIALS AND METHODS: Distal roots of 80 permanent first mandibular molars with a single canal were sectioned at 3mm and 9mm from the anatomical apex. Two groups were formed according to the method used for root canal penetration: group 1 (K-file and Pro Taper instruments) and group 2 (Ultrasound with Pro Ultra and Pro Taper files). Before and after the completion of procedures, photographs of the roots were taken for examination for cracks or/and infraction lines with two levels of magnification and with or without a dye. RESULTS: In groups 1 and 2, either with dye or without it, there were statistically significant differences (P<0.001) with more fractures observed in the coronal than in the apical part of specimens. Statistically significant proportional differences regarding the location of fractures were observed at both magnifications. When the dye was used, there were no statistically significant differences between the two magnifications in the detection of cracks. In the specimens where the dye was not used, differences between the groups were statistically significant at both magnifications with more complete and intra-dental fractures observed in group 2. CONCLUSIONS: Retreatment methods had a damaging effect on the root dentin of teeth previously treated with resorcinol-formaldehyde resin. At magnification ×16, the efficacy of using the dye for the detection of cracks was higher than detection without the dye.

The appearance of root canal surfaces in teeth previously treated using resorcinol-formaldehyde resin: a preliminary SEM investigation.

OBJECTIVE: To evaluate the root canal surfaces in teeth previously treated using RF resin by SEM. MATERIAL AND METHODS: 20 distal roots of mandibular molars with typical discoloration of tooth crown were used in this study: 10 brownish - red and 10 non-colored roots. The roots were removed from the crowns, splinted longitudinally and subjected to SEM in a back-scattered electron mode. RESULTS: In discolored root samples canal walls appeared without smear layer and varying amount of remaining debris, the observed morphology of dentine was ordinary. In the non-colored root samples the dentin profile revealed: in coronal third of the root just few open dentinal tubules were detected, while in the middle and apical thirds no open dentinal tubules were observed, dentin profile was similar to sclerotic dentin. The multiple dentinal defects were detected in all samples, however significantly more dentinal defects were found in the colored roots. The RF paste was well adhered to the root canal dentine and multiple tags of RF resin penetrating deeply into the dentinal tubules were detected. CONCLUSIONS: The surfaces of the root canal walls of the teeth treated using RF paste exhibits usual appearance and ordinary dentin morphology in colored roots while the dentin of non-colored samples has the profile of sclerotic dentin. Multiple dentinal defects could be determined by damaging effect of RF resin on dentin. The adaptation and adhesion of RF paste to the dentin, capability to penetrate into dentinal tubules is comparable with the modern resin based sealers.

Traumatic dental injuries: etiology, prevalence and possible outcomes.

OBJECTIVE: . The aim was to overview the etiology, prevalence and possible outcomes of dental trauma. MATERIAL AND METHODS: An electronic search of Medline (PubMed), Cochrane, SSCI (Social Citation Index), SCI (Science Citation Index) databases from 1995 to the present, using the following search words: tooth injuries, tooth trauma, traumatized teeth, dental trauma, dentoalveolar trauma, oral trauma, epidemiology, etiology, prevalence, prevention, pulp necrosis, inflammatory resorption, ankylosis, cervical resorption, was performed. RESULTS: During last decade traumatic dental injuries were recognized as public dental health problem worldwide. Prevalence of traumatic dental injuries varies between countries. According to the existing data they are more prevalent in permanent than in primary dentition. All treatment procedures in case of dental trauma are directed to minimize undesired consequences despite that treatment of traumatic dental injuries in the young patient is often complicated and can continue during the rest of his/her life. The changing lifestyle and requirements of modern society lead to an emergence of new patterns of dental trauma. A regular update of knowledge in dental traumatology is required.

Effectiveness of disinfection therapies and promotion of osteoblast growth on osseotite and nanotite implant surfaces.

OBJECTIVES: To evaluate the effectiveness of 4 procedures to disinfect implant surfaces intentionally inoculated with bacteria and afterward to evaluate osteoblast viability to the disinfected implant surfaces. MATERIALS AND METHODS: Eighty-eight commercially pure Osseotite and Nanotite titanium implant discs were inoculated with Porphyromonas gingivalis. The implant surfaces were disinfected with EDTA, tetracycline, citric acid, or neodymium-doped yttrium aluminum garnet (Nd:YAG) laser. The implant discs were then placed in cultures of osteoblast cells. RESULTS: Osseotite implant discs were easier to disinfect compared with the Nanotite implant discs. Citric acid and tetracycline were the most effective solutions for the disinfection of P. gingivalis from the Osseotite implant discs. CONCLUSION: The Nanotite implant discs were the most difficult to disinfect, likely because of their chemical and physical properties. Citric acid and tetracycline were most effective for disinfecting the Osseotite implant discs, and further clinical research is needed to verify these effects in vivo. The Nd:YAG laser was the weakest disinfection method, and it is not recommended for disinfecting implant surfaces until its effectiveness is improved.